TRIMIX FLOORING, INDUSTRIAL FLOORING, HEAVYDUTY FLOORING , Trimix flooring pune

 TRIMIX FLOORING, INDUSTRIAL FLOORING, HEAVYDUTY FLOORING , Trimix flooring pune

Anand Enterprises Trimix FLOORING PUNE

WWW.ANANDTRIMIX.COM  

Our Specialities: 

  1. VDF Flooring (Vacuum Dewatered Flooring or                 Tremix Flooring)

  2. IPS Flooring

  3. Groove Cutting

  4. Epoxy Flooring

  5. Concrete Dust Treatment


  6. Polished Concrete 

  TRIMIX FLOORING PUNE , Trimix Flooring Contractor Pune

Welcome to Anand Enterprises pune , We are a Proprietorship  construction company since 2000 with the high quality in contracting and Construction  services.We are taking projects all over in INDIA.

We are in as Contractors, Civil Contractors ,Structural Engineers, Road Contractors, Land Developers, Landscaping Contractors, Earth Movers, Rock Breakers, Residential Building Contractors, Industrial Building Contractor, POP Contractors, Flooring Contractors, Paver Block Contractors, Trimix Contractors,Building Materials Suppliers and anything in construction industry.

We are maintain a long term trusting relationship with our customers  like architects, builders,individual house owners and all of our customers through mutual respect. 

ANYTHING-ANYWHERE-ANYTYPE IN CONSTRUCTION-SINCE 2000.

Vacuum Dewatered Floors

As a major trimix contractor we also engage in the task of trimix flooring, also known as vacuum dewatered floors. Our trimix flooring has enormous advantage over the traditional concrete floors and has gained worldwide fame in a very short span of time. Counting the major benefits of trimix flooring, it increases the compressive strength and the tensile strength of the floor by at least 60% to 70%. The abrasion resistance of the floor too increases which minimizes the wear and the tear process. With trimix flooring, we have cut down the cement consumption rate of many of the industries. All these facilities are brought to your doorstep by us because of the use of advanced technology. These are the reasons that we are considered to be one among the most reliable Trimix contractors in the country.

How to do the VDF Flooring?

Procedure: In this system of VDF Flooring or Vacuum Dewatered Flooring, concrete is poured in place & vibrated with a poker vibrator especially to the sides of the panel for floor thickness more than 100mm. Then surface vibration is done using double beam screed vibrator running over the surface, supported on channel shuttering spaced 4.0 meters apart. The screed vibrator is run twice to achieve optimum compaction & levelling. The vibrated surface is then levelled using a straight edge.

After this a system of lower mats & top mat is laid on the green concrete & this is attached to a vacuum pump. This draws out surplus water if any. The concrete is left to stiffen. When the base concrete has stiffened to the point when light foot traffic leaves an imprint of about 3-6 mm, Floor Hardener is applied at an even application rate of between 3-5 Kg/Sqmt. Any bleed water should now have evaporated, but the concrete should have a wet sheen. The concrete is then further compacted and levelled using Power Floater followed by finishing as per the requirement using Power Trowel.

Groove Cutting Methodology:

Providing grooves of size 5mm wide and 25mm deep (or as required at site) to form bays of 4Mtrs X 4Mtrs using groove cutting machine with diamond cutting wheel and filling of the grooves with  appropriate sealant.

What is Groove Cutting?

Groove Cutting is cutting the laid concrete providing grooves of size 5mm wide and one third of the thickness of the concrete (or as required at site) within 48 hours of laying of the concrete to form bays of 4Mtrs X 4Mtrs using heavy duty cutting machine with diamond cutting wheel and filling of the grooves with  appropriate sealant.

Concrete expands and contracts constantly with changes in the temperature, the moisture content of the air and due to drying of cement which results in shrinkage. The movements result in stress that can cause cracks in the concrete and destabilization of the base.

Uncontrolled cracking can cause an uneven surface, which is subject to increased wear over time and water seepage, which can damage the substrate. Though cracking is almost impossible to prevent, it can be controlled. The use of specific types of control joints helps accommodate the movement of the concrete and avoid long-term damage.

Making Grooves is one such method to insert contraction joints into slabs to guide cracks along a predetermined line. The purpose of the Groove Cutting is to weaken the slab along the approved line so that the slab cracks there instead of somewhere else. In order to be effective, the contraction joint must be at least one quarter as deep as the slab is thick.

In case of heavy load traffic, a Load Transfer mechanism is used. Load transfer devices prevent the cement slabs from shifting under heavy loads. Shifting can cause uneven slabs and breakdown in the joints. Dowels, load plates, or slots can be embedded into the concrete to act as load transfer devices. These devices are laid perpendicular to the construction joint, extending into both slabs across the joint. Their purpose is to distribute the load evenly between slabs thereby protecting the concrete along the joints.

What are the Benefits of VDF Flooring?

1.     Increased Compressive Strength

2.     Increased Tensile Strength

3.     Increased Abrasion Resistance

4.     Minimum Shrinkage & Floor Wraps

5.     Decreased Cement Consumption

What are the Typical Application Areas of VDF Flooring?

1.     Warehouses, Godowns

2.     Roads, Sports Courts

3.     Cellars, Parking Areas

4.     Production Areas,

5. Pharmaceutical Companies

Process

In this system, concrete is poured in place & vibrated with a poker vibrator. Then a screed vibrator is run over the surface, supported on channel shuttering spaced 4.0 meters apart. The screed vibrator is run twice to achieve optimum compaction & leveling. After this a system of lower mats & top mat is laid on the green concrete & this is attached to a vacuum pump. This draws out excess waterPune Trimix, TRIMIX FLOORING, INDUSTRIAL FLOORING, HEAVYDUTY FLOORING

CONTACT:- Sr no.15/78A, plot no 55, Audumber colony 'B', Karvenagar, Pune.52

 
                  Anand padmakar ?# +918055555342 /9028400707

TRIMIX FLOORING PUNE , TRIMIX FLOORING, INDUSTRIAL FLOORING, HEAVYDUTY FLOORING

anand Trimix , we are one of the construction companies in pune .construction all types of structures ,buildings ,roads .RCC, excavation .and specialist in TRIMIX ,PAVER BLOCK etc.

CONTACT:- Sr no.15/78A, plot no 55, Audumber colony 'B', Karvenagar, Pune.52

 
                  Anand padmakar ?# +918055555342 /9028400707

website  www.anandtrimix.com  

                 

 ON Facebook

 https://www.facebook.com/pages/Anand-enterprises-pune/254090941335455?ref=hl

Pune Trimix, TRIMIX FLOORING, INDUSTRIAL FLOORING, HEAVYDUTY FLOORING